Product Overview
Schlage S280PD-FLA-619 Satin Nickel Storeroom Double Locking Interconnected Flair Handle
Certification: ANSI A156.12-2005, Grade 2 Lock
Deadbolt: 1” x 2-1/4”, Square corner faceplate, 1” housing, 1” throw
DeadLatch: 1" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strike: 1-1/8" x 2-3/4", Square corner, box (deadbolt) and 1-1/8” x 2-3/4”, Square corner, T-strike, box (deadlatch)
Reinforcement: Metal dust box reinforcer with three – 3” screws
Backset: Fits either 2-3/8” or 2-3/4”
Cylinder: 6-Pin upper and lower, solid brass, keyed 6-pin, c123 keyway
Door range: 1 3/8" – 2"
Two nickel silver cut keys per lock, 6-pin, C123 section
Keys: Two nickel silver cut per lock
Handing instructions.
Step 1. Stand outside of the door where the lever will be installed.
Step 2. Observe which side of the door the hinges are on. If the hinges are on the left side of the door, specify a Left-Hand (LH) lever on your order. If the hinges are on the right side of the door, specify a Right-Hand (RH) lever.
See above inset picture.
Certification: ANSI A156.12-2005, Grade 2 Lock
Deadbolt: 1” x 2-1/4”, Square corner faceplate, 1” housing, 1” throw
DeadLatch: 1" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strike: 1-1/8" x 2-3/4", Square corner, box (deadbolt) and 1-1/8” x 2-3/4”, Square corner, T-strike, box (deadlatch)
Reinforcement: Metal dust box reinforcer with three – 3” screws
Backset: Fits either 2-3/8” or 2-3/4”
Cylinder: 6-Pin upper and lower, solid brass, keyed 6-pin, c123 keyway
Door range: 1 3/8" – 2"
Two nickel silver cut keys per lock, 6-pin, C123 section
Keys: Two nickel silver cut per lock
Handing instructions.
Step 1. Stand outside of the door where the lever will be installed.
Step 2. Observe which side of the door the hinges are on. If the hinges are on the left side of the door, specify a Left-Hand (LH) lever on your order. If the hinges are on the right side of the door, specify a Right-Hand (RH) lever.
See above inset picture.
